Double Glue Lined Medium HEATSHRINK Wall Tubing 120mm-40mm 1.2M long

Double Glue Lined Medium HEATSHRINK Wall Tubing 120mm-40mm 1.2M long

This heatshrink tube features a glue-lined inner surface and is made from a single extrusion of polyolefin that is partially irradiated, commonly referred to as 'dual walled'.

Key Features of Dual Walled Flexible Glue Lined Heatshrink:

• Highly flexible
• Very high shrink ratio 3:1
• Flame retarded
• Good mechanical adhesion

Applications:

This material is highly versatile and ideal for both electrical and mechanical protection applications.

• Automotive Industry: Commonly used for brake and fuel pipe protection due to its glue-lined design that holds the tubing securely in place.
• Electrical Applications: Perfect for strain relief on cords and insulation repair.

Note: This tubing is not generally recommended for waterproofing, as the glue layer is primarily for mechanical adhesion and is relatively thin.

Technical Data:

• Conformant Standards: UL, MIL-1-23053/4, JIS
• Material: Dual wall, flexible, flame-retarded polyolefin with modified polyamide adhesive sealant
• Continuous Operating Temperature: -55°C to +110°C
• Shrinkage Temperature: Starts at 90°C, completed at 125°C
• Tensile Strength: 10.5 MPa
• Elongation at Break Point: 200%
• Longitudinal Shrinkage: 15%
• Breakdown Voltage: 20 kV/mm wall thickness
• Volume Resistivity: 1.0 x 10¹⁴ ohm cm
• Water Absorption: 0.5%
• Flammability: All tubing flame test: PASS
• UV Resistance: Passed - ISO 1408
• Voltage Rating: 600 V

This product, offered by Energy Electrical And Industrial Supplies Pty Ltd, is a reliable and efficient solution for your heat shrink tubing needs.